Meu apache só lê HTML. Não consegui fazer ele ler PHP...

[willwalker 2]

Alguem pode me ajudar ?

 

Meu httpd.conf:

 

#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2/> for detailed information.
# In particular, see 
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Arquivos de programas/Apache Software Foundation/Apache2.2" will be interpreted by the
# server as "C:/Arquivos de programas/Apache Software Foundation/Apache2.2/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default.  It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
#

# ThreadsPerChild: constant number of worker threads in the server process
# MaxRequestsPerChild: maximum  number of requests a server process serves
ThreadsPerChild 250
MaxRequestsPerChild  0

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk.  If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "C:/Arquivos de programas/Apache Software Foundation/Apache2.2"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#
#Listen 12.34.56.78:80
Listen 127.0.0.1:80
Listen willwalker.no-ip.org:90

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule headers_module modules/mod_headers.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule status_module modules/mod_status.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule ssl_module modules/mod_ssl.so
LoadModule php5_module "C:\PHP\php5apache2_2.dll"

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin wilzinho2901@hotmail.com

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName localhost:80

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "C:/Arquivos de programas/Apache Software Foundation/Apache2.2/htdocs"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories). 
#
# First, we configure the "default" to be a very restrictive set of 
# features.  
#
<Directory />
	Options FollowSymLinks
	AllowOverride None
	Order deny,allow
	Deny from all
	Satisfy all
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "C:/Arquivos de programas/Apache Software Foundation/Apache2.2/htdocs">
	#
	# Possible values for the Options directive are "None", "All",
	# or any combination of:
	#   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
	#
	# Note that "MultiViews" must be named *explicitly* --- "Options All"
	# doesn't give it to you.
	#
	# The Options directive is both complicated and important.  Please see
	# [url="http://httpd.apache.org/docs/2.2/mod/core.html#options"]http://httpd.apache.org/docs/2.2/mod/core.html#options[/url]
	# for more information.
	#
	Options Indexes FollowSymLinks

	#
	# AllowOverride controls what directives may be placed in .htaccess files.
	# It can be "All", "None", or any combination of the keywords:
	#   Options FileInfo AuthConfig Limit
	#
	AllowOverride None

	#
	# Controls who can get stuff from this server.
	#
	Order allow,deny
	Allow from all

</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
	DirectoryIndex index.html index.php default.php main.php
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<FilesMatch "^\.ht">
	Order allow,deny
	Deny from all
</FilesMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog logs/error.log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
	#
	# The following directives define some format nicknames for use with
	# a CustomLog directive (see below).
	#
	LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
	LogFormat "%h %l %u %t \"%r\" %>s %b" common

	<IfModule logio_module>
	  # You need to enable mod_logio.c to use %I and %O
	  LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
	</IfModule>

	#
	# The location and format of the access logfile (Common Logfile Format).
	# If you do not define any access logfiles within a <VirtualHost>
	# container, they will be logged here.  Contrariwise, if you *do*
	# define per-<VirtualHost> access logfiles, transactions will be
	# logged therein and *not* in this file.
	#
	CustomLog logs/access.log common

	#
	# If you prefer a logfile with access, agent, and referer information
	# (Combined Logfile Format) you can use the following directive.
	#
	#CustomLog logs/access.log combined
</IfModule>

<IfModule alias_module>
	#
	# Redirect: Allows you to tell clients about documents that used to 
	# exist in your server's namespace, but do not anymore. The client 
	# will make a new request for the document at its new location.
	# Example:
	# Redirect permanent /foo [url="http://localhost/bar"]http://localhost/bar[/url]

	#
	# Alias: Maps web paths into filesystem paths and is used to
	# access content that does not live under the DocumentRoot.
	# Example:
	# Alias /webpath /full/filesystem/path
	#
	# If you include a trailing / on /webpath then the server will
	# require it to be present in the URL.  You will also likely
	# need to provide a <Directory> section to allow access to
	# the filesystem path.

	#
	# ScriptAlias: This controls which directories contain server scripts. 
	# ScriptAliases are essentially the same as Aliases, except that
	# documents in the target directory are treated as applications and
	# run by the server when requested rather than as documents sent to the
	# client.  The same rules about trailing "/" apply to ScriptAlias
	# directives as to Alias.
	#
	ScriptAlias /cgi-bin/ "C:/Arquivos de programas/Apache Software Foundation/Apache2.2/cgi-bin/"

</IfModule>

#
# "C:/Arquivos de programas/Apache Software Foundation/Apache2.2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "C:/Arquivos de programas/Apache Software Foundation/Apache2.2/cgi-bin">
	AllowOverride None
	Options None
	Order allow,deny
	Allow from all
</Directory>

# 
# Apache parses all CGI scripts for the shebang line by default.
# This comment line, the first line of the script, consists of the symbols
# pound (#) and exclamation (!) followed by the path of the program that 
# can execute this specific script.  For a perl script, with perl.exe in
# the C:\Program Files\Perl directory, the shebang line should be:

   #!c:/program files/perl/perl

# Note you _must_not_ indent the actual shebang line, and it must be the
# first line of the file.  Of course, CGI processing must be enabled by 
# the appropriate ScriptAlias or Options ExecCGI directives for the files 
# or directory in question.
#
# However, Apache on Windows allows either the Unix behavior above, or can
# use the Registry to match files by extention.  The command to execute 
# a file of this type is retrieved from the registry by the same method as 
# the Windows Explorer would use to handle double-clicking on a file.
# These script actions can be configured from the Windows Explorer View menu, 
# 'Folder Options', and reviewing the 'File Types' tab.  Clicking the Edit
# button allows you to modify the Actions, of which Apache 1.3 attempts to
# perform the 'Open' Action, and failing that it will try the shebang line.
# This behavior is subject to change in Apache release 2.0.
#
# Each mechanism has it's own specific security weaknesses, from the means
# to run a program you didn't intend the website owner to invoke, and the
# best method is a matter of great debate.
#
# To enable the this Windows specific behavior (and therefore -disable- the
# equivilant Unix behavior), uncomment the following directive:
#
#ScriptInterpreterSource registry
#
# The directive above can be placed in individual <Directory> blocks or the
# .htaccess file, with either the 'registry' (Windows behavior) or 'script' 
# (Unix behavior) option, and will override this server default option.
#

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
	#
	# TypesConfig points to the file containing the list of mappings from
	# filename extension to MIME-type.
	#
	TypesConfig conf/mime.types

	#
	# AddType allows you to add to or override the MIME configuration
	# file specified in TypesConfig for specific file types.
	#
	#AddType application/x-gzip .tgz
	#
	# AddEncoding allows you to have certain browsers uncompress
	# information on the fly. Note: Not all browsers support this.
	#
	#AddEncoding x-compress .Z
	#AddEncoding x-gzip .gz .tgz
	#
	# If the AddEncoding directives above are commented-out, then you
	# probably should define those extensions to indicate media types:
	#
	AddType application/x-compress .Z
	AddType application/x-gzip .gz .tgz
	AddType application/x-httpd-php .php .phtml
	AddType application/x-httpd-php-source .php

	#
	# AddHandler allows you to map certain file extensions to "handlers":
	# actions unrelated to filetype. These can be either built into the server
	# or added with the Action directive (see below)
	#
	# To use CGI scripts outside of ScriptAliased directories:
	# (You will also need to add "ExecCGI" to the "Options" directive.)
	#
	#AddHandler cgi-script .cgi

	# For type maps (negotiated resources):
	#AddHandler type-map var

	#
	# Filters allow you to process content before it is sent to the client.
	#
	# To parse .shtml files for server-side includes (SSI):
	# (You will also need to add "Includes" to the "Options" directive.)
	#
	#AddType text/html .shtml
	#AddOutputFilter INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 [url="http://localhost/subscription_info.html"]http://localhost/subscription_info.html[/url]
#

#
# EnableMMAP and EnableSendfile: On systems that support it, 
# memory-mapping or the sendfile syscall is used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted 
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be 
# included to add extra features or to modify the default configuration of 
# the server, or you may simply copy their contents here and change as 
# necessary.

# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf

# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf

# Language settings
#Include conf/extra/httpd-languages.conf

# User home directories
#Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf

# Virtual hosts
#Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf

# Various default settings
#Include conf/extra/httpd-default.conf

# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
#	   starting without SSL on platforms with no /dev/random equivalent
#	   but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>

Abraços WILL http://forum.imasters.com.br/public/style_emoticons/default/thumbsup.gif

[Paulo André 0]

Hummm.. não sei ao certo o que pode ser, mas tente inserindo a linha abaixo:

PHPIniDir "C:/PHP"

Após: (linha 387 do seu arquivo)

AddType application/x-httpd-php-source .php

Reinicie o Apache e teste.

 

Flws...

;)

[Leonardo P 0]

você instalou o php? :huh:

[Kante 0]

Aqui eu estou usando o Easyphp2, o qual instala automaticamente o Php5, apache e MySQL e tive um problema similar dia destes...Daí desinstalei o Easy e reiniciei o micro...Como percebi que a pasta do Easy ainda estava presente, deletei ela toda...

 

Daí instalei o EasyPhp novamente e tudo funcionou beleza...

 

Ou seja, tenta desinstalar e reinstalar o teu servidor php novamente que talvez resolve....Caso dê certo, posta aí para a galera saber. []'s

[Alaerte Gabriel 662]

Se mesmo reinstalando o servidor o erro persistir, recomendo a instalação do AppServ... é um pacote semelhante ao Easy PHP porém, ao meu ver é melhor, embora eu não use nenhum dos...

 

o melhor seria mesmo a instalação manual dos pacotes, aqui no iMasters tem um tutorial referente ao mesmo.

 

Abraço.

[willwalker 2]

Consegui instalar, segui um tutorial do babooforum. Obrigado pela ajuda, quem tiver o interesse em aprender só ir nesse link.

 

http://www.babooforum.com.br/forum/index.p...howtopic=498408

 

Se não pode colocar links de outros forums, desculpa, é que gosto de compartilhar informações =]